ITHEC 2018 Manuscript P05

Author: Hubert Borgmann
Pages: 4
Language: English
Publication date: 01/10/2018
12.99 €
VAT included
Instant download after purchase
Adobe PDF format Adobe PDF format
Manuscript P05 published in Conference Proceedings ITHEC 2018
Development of Rivet Fastening Process by Servo Press Machine Unidirectional CFRTP Rod
D. Tanabe, National Institute of Technology, Gobo-shi, Japan
T. Eguchi, T. Mimura, T. Hida
Dai-Ichi Dentsu Ltd., Kani-shi, Japan
K. Nishiyabu, Kindai University, Higashiosaka-shi, Japan

This study aims to develop carbon fiber reinforced thermoplastic (CFRTP) rivet fastening process using a servo press machine and infrared or high frequency induction heating. The materials used for experiment were unidirectional carbon fiber reinforced polyamide 6 (UD-CF/PA6) rod for rivet fastener. Specimens were made from CF/PPS laminates or AISI304 stainless steel of 2.0 mm thickness. The tensile shear strength was compared by CFRTP rivet, aluminum rivet and epoxy adhesive. The effects of heating time, forming load and holding time on fastening process were investigated. The optimum CFRTP rivet fastening process condition was obtained to improve the joining strength. The contents for evaluation are heating distribution of UD-CF/PA6 rod, pressure loading behavior, cross-sectional observation after joining and tensile shear strength test. The tensile shear strength of the CFRTP rivet was 200 MPa, which was higher than aluminum rivet and epoxy adhesion. In the case of UD-CF/PA6 rivet specimen, the strength was increased significantly compared to the other fastening and bonding because unidirectional carbon fiber was located continuously within the matrix polymer. The structure where the rivet head and body are united with continuous fibers showed sufficient strength. The high availability of CF/PA6 rivet as mechanical fastener was shown from mentioned results.
El vendedor asume toda la responsabilidad de esta entrada.
Hubert Borgmann, MESSE BREMEN,
Project Manager ACTUATOR, International Conference and Exhibition on New Actuators and Drive Systems, Bremen, Germany, and Editor of the ACTUATOR Conference Proceedings (
Project Manager ITHEC, International Conference and Exhibition on Thermoplastic Composites, Bremen, Germany, and Editor of the ITHEC Conference Proceedings (

If you like this ebook, you might also like:

© 2020 XinXii - GD Publishing Ltd. & Co. KG. Imprint | Terms of Use | Privacy Policy
€ Euro
International sites: German | English | Spanish | French | Italian | Dutch | Portuguese | Russian